“Power rodding system can blast and clean away pipe clogs and sludge accumulation and even problematic tree roots.”
Power Rodding – Clean Out Clogs & Sludge.
Power rodding system from H.T. Strenger Plumbing uses a flexible metal cable that threads into drain systems it can move around bends and joints. Cleaning heads are installed at the leading end of the cable. The cleaning attachment is sized to the diameter of the pipe being treated. A Mechanical electric motor rotates the cable at a high rate of speed: removing the obstruction blocking the pipe. These techniques can also shears off tree roots and years of sludge buildup. High-speed cutting tool shreds the obstructive material blocking the pipe into small fragments that are easily flushed away.
Cleaning heads are installed at the leading end of the cable. The cleaning attachment is sized to the diameter of the pipe being treated. A Mechanical electric motor rotates the cable at a high rate of speed: removing the obstruction blocking the pipe
Hydro Jetting Plumbing.
Despite the pressures involved, clearing blockages with hydro jetting causes the least damage to interior pipes because there is no heavy-duty snake or metal cable involved as with other methods.
H.T. Strenger jetting systems can now successfully clear and clean drains ranging from 1-inch home drains to large municipal sewer lines.
If you are having problems with sewer lines moving slowly, then you may need to have them cleaned out. Jet rodding, or hydro jetting is the means of cleaning your sewer pipes through the use of high intensity water. Hydro jetting helps cut through grease and debris in your sewer lines and may be the answer to sluggish flushing and draining problems. We provide you with state-of-the-art hydro jetting procedures that allow us to clean all debris from your pipes, resulting in them running as if they are brand new.
While your plumbing system is designed to carry waste and debris downstream, sometimes they just become clogged with grease, hair and other debris. Using a hydro jetting process, we start at the end of your plumbing lines and force debris out. This process is used when traditional plumbing techniques such as mechanical rodding and plungers are not correcting the problem.